Tuesday, 22 November 2016

Undercoating – Save your Car from the Invasion of Rust!


rust protection

Car undercoating is often overlooked by several vehicle owners, despite its relevance in increasing the lifespan of cars. Undercoating and rust proofing your vehicle can really save your car from the phenomenon of rust and corrosion. As your car constantly comes in contact with several substances outdoors such as water, dirt and debris, the chances for it to corrode is very high. Here’s an in-depth view of car undercoating you need to know.

Car Undercoating – An Overview

A protective layer that is applied to the undercarriage is called as undercoating. As you use your car for several years, the undercarriage is subjected to wear and tear and is often left unnoticed by most car owners. Unless and until you apply sufficient undercoating to the undercarriage, it would be prone to mechanical damage due to weathering.

How is Undercoating done?

Undercoating is usually suggested to be performed by experienced professionals. Application of undercoating is required to be done meticulously and is always wise to be left to the experts if you aren’t quite acquainted with the works. Even though it is possible to perform undercoating without the use of professional tools or expert assistance, the end results would not be satisfactory.

Undercoating & Rust Proofing – Is there a Difference?

If you browse through different measures used to protect your undercarriage, you might have also come across rust proofing as well. However undercoating and rust proofing are in no way related to each other. Rust proofing is similar to undercoating, except for the fact that the former has a shorter lifespan than the latter.

Methods of Undercoating

When you have decided to apply undercoating to your vehicle, there are different options for you to choose from. Here’s what you need to know:

1.    Passage of Electric Current: With the help of an electronic device installed on your car, a weak electric current will be passed to inhibit the effects of corrosion or rust. This is a budding technology that has been receiving only moderate reviews.

2.    Undercoating Products: This method involves spraying over certain parts of a vehicle’s body that requires protection. Once it hardens, the coating gives enough protection against salt, moisture and other substances. This shall better be done with the help of an expert.

3.    Dripless Oil Spray: A wax-like substance will be sprayed over the entire body, which will dry and get hardened. The only disadvantage is that holes need to be drilled at specific points of the car before application.

4.    Drip Oil Spray: This is one amongst the most commonly adopted rust protection measures. Once applied, dripping continues as long as they become dry. Dripping can last up to 48 hours.

Click Here to know more interesting and useful facts about undercoating your cars.

A Little About Noxudol:

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. All the products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Monday, 14 November 2016

The Importance of Undercoating Your Car


 car undercoating

Your car is a major investment, and it should be protected! Rust can reduce the shelf life of your vehicle and so it’s vital to take steps to prevent rust from happening! You may think, “You’re driving your car in the safest road and there is no chance to get rust.” But the fact is: Even the safest drivers’ encounter daily challenges and any of them can wreak havoc on your vehicle’s appearance. Abrasive road salt, sticky tree sap, fine scratches left by low-hanging tree limbs — all can rub away the manufacturer’s paint and the swipe away the coat on top of it. And once your vehicle’s paint begins chipping away, damaging rust isn’t far behind. Getting ready to protecting your car from rust is a smarter option to protect your investment. In this article, we’ll discuss what undercoating is and how it helps to prevent your car from corrosion & rust.

What is Undercoating?

When purchasing a new car or maintaining a used car, car owners often hear about car undercoating, and think what does it really mean? Undercoating provides an additional layer of protection or insulation to the undercarriage of a vehicle. It covers most of the car’s underside, including floor boards, pans, gas tank, wheel wells, frame and suspension parts, mufflers and exhaust pipes. By doing this, it may in fact help extend your car’s life and utility.

Ingredients Used in Undercoating

Ingredients used in car undercoating include: fiberglass, ceramics, rubber, silicone, asphalt, or petroleum. Each ingredient has different properties in terms of heat resistance, but all do offer the same level of protection against the elements of rust and corrosion.

The Pros of Undercoating

Why is car undercoating so important to all drivers and car owners? Many people live in places where seasonal changes can have a negative impact on their motor vehicle. You may think, paint is meant to protect a car’s body from the effects of rust, but dents and damage can create openings in the paint for rust to occur. For this reason, many people choose to undercoat their cars. Since the under layer of a car is more often exposed to the elements of the road, many drivers choose to add a layer of protection which is like a paint job for underneath the vehicle. The other plus of undercoating is that it provides a car with a sound dampener that makes operating the vehicle much quieter on the road.  Everybody likes to have a quieter ride, right? For many people, the cons of undercoating weigh more than the pros of undercoating. The main drawback of undercoating is COST. Although undercoating is costly, there are alternatives to having undercoating professionally done. Undercoating kits like Noxudol USA are sold that allow operators to undercoat their vehicles at a fraction of the professional cost.

Now we can discuss the different types of undercoating…

When having your vehicle rust proofed or an undercoating applied, you have a few points to choose from. Whether you prefer to choose a new latest method or the more tried and true method, knowing what the different options are should allow you to choose the best one of your vehicle.

Electronic Method

Using a weak electric current, this method can stop the corroding effects of rust. This method is not as much preferred by car owners and drivers. The reviews on this method are mixed, as this is a virtually new technology.

Undercoating Method

This method involves spraying a tar-based substance on the exposed parts of a vehicle’s underbody. This undercoating acts as a barrier once it hardens which keeps moisture, salt and other corrosion triggering substance out.

Dripless Oil Spray

A wax-like substance sprayed to the entire body of the vehicle, it hardens once it has dried. This spray has a high viscosity which means that it does not get into all the nooks and corners of the undercarriage.

Drip Oil Spray

Drip oil sprays tend to continue to drip once applied until they dry. This dripping can last anywhere up to 48 hours after application. This is the most commonly used undercoating method. By reading this article, now you may aware of the importance of undercoating. Undercoating can be an expense you really didn’t plan on, but it is also one that can prolong the life of your car, which might save you money in the long run.

Click Here to know more interesting and useful facts about undercoating your cars.

A Little About Noxud
ol:

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. All the products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Sunday, 16 October 2016

Useful Car Rust Removal Methods

Rust proofing spray


Is your car left neglected for some significant period of time? This is enough for rust to take a foothold on one of the weak parts of your car. So, it is important for all car owners to have at least a general idea about rust inhibitor and rust proofing. Rust Inhibitor Spray is a solvent-free formula and it is a science-based anti-rust product which completely prevents rust and keeps on working to stop rust for days/months and potentially years without the need of reapplication. Likewise, Rust proofing spray can oil the body of the car and when applied annually, it prevents the formation of the rust. It easily enters into tiny spaces, folds and joints and protects them from rust. It also saves electrical components, brake and fuel lines from getting rusted.

Car rust inhibitors can be applied by three different methods, which may depend on the shape and size of the part to be coated. The three methods commonly used are spray coating, dip application and flow coating.
  • Spray Coating: This involves the familiar spray coating, in which the rust inhibitor is placed in a solvent or water-based solution. Then, with the help of spraying equipment, spray the solution onto the car metal surface.
  • Dip Application: This process involves, dipping the piece to be coated in a bath and then drained and force-dried or baked to solidify the coat
  •  Flow Coating: Flow coating is used on pieces that are too large to dip and also difficult or impossible to spray. This process conveys the piece through a chamber, where it is flooded with the rust inhibitor with low pressure nozzles.
These methods of applying rust inhibitor are definitely imperative for keeping your car rust-free. Washing your car regularly and keeping it clean is still the best form of car rust protection.

Taking good care of metal items will prevent them from rusting and you can say goodbye to rust forever!

Tuesday, 4 October 2016

Effective Ways to Rustproof Your Car and its Need


rust proofing spray

Rust proofing is the permanent protection against corrosion. If you want to keep your car for long time, rustproofing is definitely a good idea and it protects your car from rust and some sort of part failures. It is especially important for the undercarriage of your car/vehicle, which commonly comes into contact with substances like water or other dirt from roadside. There are many ways to achieve rust proofing and this includes galvanizing, painting, passing electricity and rust proofing spray. Using rust inhibitor spray over the undercarriage forms a layer/coat on the metals and prevents access of any corrosive substance to the metal inside a sealed system.

Different types of Rustproofing:

Whether you prefer latest technology or any other conventional methods, checkout the following types to get the best choice for rustproofing your vehicle.

Electronic method:

Electronic rust prevention method affordably protects your vehicle from rust in extreme weather conditions and stops corrosion in hidden areas of vehicles that traditional sprays can't reach and can never fully cover.

Undercoating:

Undercoating vehicle for rust prevention involves spraying a black, tar-like substance on the floor pans, wheel wells, and other exposed parts of the underbody of your car. Once it hardens, the coating acts as a permanent shield against moisture, salt, and other elements.

Dripless oil spray:

Dripless oil spray provides excellent protection against corrosion and can be ised on both interior and exterior surfaces of vehicle. This is a wax-like substance and has high viscosity. It is applied to the entire body of the vehicle and when it gets dry and hard, the moisture falls out.

Drip oil spray:

Drip oil spray is commonly recommended by experts for rust protection and a little annoyance is the sprayed oil drips for about 48 hours after application.

With all these types, always choose the best method of rustproofing for your vehicle to protect it from rust and parts failure. See the difference and have a happy driving!

Monday, 19 September 2016

How to Maintain Your Car in Mint Shape Using Cavity Wax



Now that you have bought your car, what could go wrong? The engine is powerful, the interior is cosy, the fuel consumption is not bad and you got the car for a bargain anyway. Well, a lot could go wrong and in fact, you might not even notice.  One of the toughest car maintenance tasks is preventing and dealing with rust. This might not be the first thing on your mind as you drive out of the dealership. However, rust can ruin your driving experience when parts start leaking or even falling apart. Depending on your area’s climate, rusting could even start within months of buying your new car. While an undercoat is best for the undercarriage, there are many other parts that will not be protected.

Cavity Wax for Maximum Protection

Cavity wax is an alternative for enclosed parts and cavities where the impact of an undercoat will not be felt. This is a solvent-free product that is applied manually on areas which are prone to rusting. These include the chassis, inner cavities, windscreen, doors, trunks and hoods. While exposure is not a big issue here, there is still risk of moisture being trapped and this increases the risk of rust. Take for instance the edges of a windscreen. At a glance, this might not seem like a rust-prone area but due to exposure to the elements, moisture will eventually seep through. Once in contact with the steel below, the rusting process will immediately start. Rust proof wax spray has been designed for use both at service centres and individually by car owners.

Buying the Best Rust Protection Sprays

There are many manufacturers specializing in car rust protection solutions. When shopping for anti-corrosion (AC) waxes, consider the following factors:

1.    The brand’s reputation: Don’t go for a Johnny come lately when looking for rust proof wax. Look for a brand that has a solid reputation in the car maintenance industry. To verify this, look at the range of products the company is selling. In addition, look at the reviews from industry pundits and other users.  The longer the company has been in the industry, the better.

2.    Eco-friendly products: There is an urgent call for the auto industry to adopt eco-friendly practices. This includes making products that don’t harm the environment.  When buying rust prevention solutions, look for those that are environment-friendly.

3.    Customer support:
A reliable company should have a team ready to answer any enquiries you might have.  Whether you are confirming prices or making an order, a good brand will go out of its way to ensure you are efficiently served.

Click Here to know more about how to Maintain Your Car in Mint Shape Using Cavity Wax.

A Little About Noxudol:

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. All the products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Wednesday, 7 September 2016

Car Undercoating: The First and Last Line of Defence against Rusting



If you are planning to buy a new car, it is highly likely that you are reading a lot on proper maintenance. Of course your car is one of the most important assets you can invest in and you want to get the most out of it. More importantly, contemporary society is increasingly mobile and you will have to spend a lot of time in your car. As such, you want to maintain it in mint condition once you drive out of the dealership. One of the greatest risks in car maintenance is of course rust, especially on the exposed undercarriage. Undercoating is an important car protection technique as it protects against rusting but unfortunately, car owners are confused about the varying opinions regarding the technique. If you are wondering whether to go for car undercoating or ignore it altogether, keep reading for some invaluable insight.

Undercoating in Brief

At the turn of the 20th century, different undercoating techniques were being attempted but truth be told, they were largely ineffective. Chicken fat and asphalt were some of the strange products used to prevent rusting. Today, advanced eco-friendly solvent-free undercoating solutions have been developed and in the same breath, application technologies have also advanced. If you have been wondering whether your car required that undercoat, consider the downside of overlooking it.  In areas near the ocean, salty conditions provide ideal rust conditions.  During winter, the undercarriage is exposed to salt used to clear roads. More importantly, your car’s undercarriage and fenders are exposed to water most of the time. This provides perfect conditions for rusting. While galvanized steel is used to make most car body parts, welding leads to loss of zinc, leading to exposure. In essence, you need to check out modern car undercoating solutions from a reputable brand before driving off.

Click Here to know more about Car Undercoating.For more details Watch this video



A Little About Noxudol:

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. All the products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536



Monday, 22 August 2016

What Is Rust Proof Waxing And How To Do It?


Prevention is better than cure and in case of Rust proofing, it is cheaper than getting rid of the formed rust. After spending a lot of money buying a car, it is not unusual to think rust proofing as a waste of money. Your dealer would highly recommend rustproofing your car and he might be right in this regard. Rust proofing would provide the necessary protection for your car from most of the things that we encounter in our daily lives such as water, salt, magnesium chloride (brine solutions) and other oxidants.

If you do not intend to keep your car for a long time, then it is ok to leave the car as it is without the bother of rust proofing. But keep in mind that a rust proofed car has more resale value. In the old days, rusting is considered inevitable but still people used to apply motor oil to their vehicle to avoid rust. The method of rust proofing has evolved over the years. Though the common objective of rust proofing is to prevent the metals from getting corroded, the rise in technology has gifted us with many options and we are free to choose the way that works well for us personally.

One of those ways that you could choose is a rust proof wax . This waxing substance is also called as the Cavity wax because it can penetrate through the cavities present all over the body of a car and protect them from rusting. If left unattended, these cavities allow oxidizing agents to penetrate them and rust the car. The rust proof waxing products are available at many stores and you can also get it through online. Once you get the product, follow the steps given below to rust proof it.

1. First prepare your car by thoroughly cleaning it and allow them to dry.

2. Cover the parts that you do not want to wax for rust proofing.

Click Here to read the entire story about the rust roof waxing.

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol the most advance and reliable line of products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/about-us/ or Call 800-997-6536

Friday, 12 August 2016

Things to Know About Undercoating the Car















Your car is often exposed to corrosive substances wherever you live. They include Acid rain, salt and other things on the road which can seriously affect the underside. Rust proofing and undercoating can save it from corrosion and rust. Undercoating is a protective layer that is applied to the underside of a car where the parts are not coated with the protective layer of paint, making it likelier to get damaged by rust. Car undercoating is not necessarily added with the painting. Some people get satisfied with regular inspection and a good waxing. But since the under layer is more vulnerable than any other parts of the car, many car owners choose to have them as an extra layer of protection from rust and damage.

The perfect time to have car undercoating is when it is still new. You can be well assured that your car is protected right from the first drive. That doesn’t mean used cars cannot have undercoating as the car was already exposed to dust, chemicals and grime from the road. Coating the underside can protect it from further exposure and damage.

The advantages of having a car undercoated are given here,

•    You do not have to worry constantly about corroded parts and drive freely on salty roads without any dread.

•    The weight of the car is increased. Though it is usually viewed as a disadvantage, it can also bring more stability to the car.

Click Here to read the entire story about the advantages of car undercoating.

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol the most advance and reliable line of products are manufactured and engineered to provide exceptional rust protection to all motor vehicles, industrial, marine and rail. To know more, visit http://www.noxudolusa.com/about-us/ or Call 800-997-6536

Tuesday, 28 June 2016

Popular Misconceptions about Rust Proofing In Cars



Everybody would like to have their car maintained properly with new look and good resale value. You are also no exception. Unfortunately, cars are made up of metals and steel which make them prone to rust. It is something that is inevitable because rust gets developed based on many factors which are beyond our control. There are many misconceptions surrounding rust and rust proofing that may give you a wrong idea about them. These misconceptions are given below,

•    Rust Proofing In Cars Are Not Done After Rust Appears

If your car was affected by rust, Rust proofing can be done to avoid the rust getting spread to other parts. This can slow down the corrosive process and save those parts you still have left.

•    Rust Proofing Should Be Avoided During Winter

People used to avoid rust proofing jobs at winter because of the moist and salty environment. Salt when gets combined with moisture serves as a catalyst to the corrosion process which can severely affect your vehicle if it is unprotected. As long you clean the car thoroughly and get rid of the salt, rust proofing application can still be done. It is also recommended better to apply it before the winter starts.

•    Rust Proofing Should Be Done Annually

This is a wrong assumption. Rust proofing can withstand for years. In fact, best rust proofing jobs can last up to 10 years depending on the condition of the vehicle.

•    Rust Cannot Be Repaired

If caught on earlier stages, the progress of rust can still be halted. It still depends on where and how far the rust is spread. If left unchecked, rust becomes irreparable and the damage is irreversible.

•    New Cars Does Not Require Rust Proofing

False! New cars are usually made of galvanized steel and there are widespread rumors that it provides protection against rust. Galvanized steel consists of prefabricated sheets of steel coated with zinc to prevent rusting. But to meet the specifications of the car design, the steel undergoes the process of welding, drilling and fitting. These processes make the steel to become stretched and worn which makes them more vulnerable.

These misconceptions keep your vehicle in danger and can lead you to lose a large amount of money in future. Keep yourself well informed about Rust proofing and protect your car from rust.

Monday, 20 June 2016

The Perks of Using Spray to Rust Proof Your Vehicle



Rustproofing your vehicle, be it old or new, is a necessary act because of many factors. Right from changes in climatic conditions and humidity to the highly corrosive chemicals used in ice and snow cleaning inroads, some harmful agents can put your vehicle body to test. Rust can cling on and spread throughout your vehicle body finally leading it to crumble in structure.

While there are quite a lot of techniques to rustproof your car, a spray can be the most advantageous of these due to many aspects. Here are a few reasons why it is better to rust proof your undercarriage with spray rather than other means:

1. Better Approach: Rust just needs a square centimeter of your undercarriage to hold on to and later on starts spreading. When you use other methods, the chances are that you won’t cover every nook and corner of the exposed parts in your undercarriage. A rust proof spray, on the other hand, can be used to cover these tough spots since you get stream concentrating tubes to attach to the nozzle that lets you cover these tough spots.

2. Easier to Apply: It's obvious that spray painting is easier than conventional brush methods, and the same goes for undercarriages. You can quickly spray on the rust proof coat rather than paint it with a brush. You can also adjust the area you want to cover with a tweak in the nozzle, whereas you will have to buy some brushes to cover little spots to bigger areas.

3. You can Choose the Density of the Coat: When it comes to choosing the density of the coat you are applying, you have very little control while using conventional means. By using a spray, you have definite control over the density. In the case of small parts, applying excessive coat can lead to the formation of air pockets which can harbor moisture and lead to corrosion. While using a spray, all you need to do is use it on rust prone places to ensure that the part is completely covered, but not over covered with the rust inhibitor spray.

If you are looking for high quality rust inhibitor spray, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Wednesday, 15 June 2016

Five Reasons Why You Should Rust Proof Your Vehicle



Whether you own a brand new car or your car is a few years old; there are aspects of any terrain that can truly test the strength of integrity of your vehicle. All cars are made of steel or its compound, and steel is an alloy of iron. With climatic fluctuation, temperature rises and drops, humidity and saline solutions being a part of the atmosphere, your vehicle can be the host of quite a set of unfavorable chemical reactions which can lead to corrosion of body parts due to rust. Rust can be a huge issue and here are five reasons why you should take rustproofing seriously:

1.    Your Undercarriage is Most Unprotected: Your undercarriage is the one part of your vehicle that is most overlooked and unprotected. Rust in your undercarriage can spread like a rash, and it can cause your vehicle to crumble from its inside.

2.    Uneven Terrain and Ground Contact: Uneven terrain, especially off road terrain which can contain all form of gravel and dirt can be a huge threat to your vehicle. Sometimes ground clearance can be challenging, and your vehicle might get a few bumps and scratches on the underside. What this does is scratch off the factory coat of wax and opens an area to harbor rust in your undercarriage.

3.    Ice Control Chemicals: If you live in cold places where snow and ice falls are frequent, then chances are your undercarriage is being worked on by some strong chemicals. Ice and snow control agents are deposited on the roads, to make them dissolve and melt faster. When you cruise along these roads, your undercarriage is subject to a spray of these chemicals in the form of melted ice.

4.    Temperature Fluctuations and Humidity: Humidity and moisture can be a huge catalyst for rust. If you live in tropical areas with quite a bit of rainfall and humidity, then it would be wise to use a rust proofing spray as soon as you buy your car since it can start rusting in no time.

5.    Spot Welding: Cars these days use “Galvannealed” steel to prevent rust. But when you do spot welding as part of your maintenance, the zinc coating around the area is melted off, and this can lead to an unprotected area where rust can build.

If you are looking for high quality rust proofing products, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Wednesday, 8 June 2016

How to Rust Proof Your Car Base?



Your vehicle undercarriage is the most exposed and most overlooked part of your vehicle. Right from dirt, mud and grime to occasional bumps and scratches due to low clearance, your vehicle’s integral parts like air pumps, fuse boxes and filters are going to be in big trouble. One of the main issues is that your undercarriage is subject to rust.  It can be a slow killer, almost like cancer it gradually spreads to virtually all crucial parts in your car base till you have to replace everything. The cost of replacing the parts of your undercarriage can be pretty high, and the safest thing to do is to prevent rust and other corrosive agents from getting hosted in your car base.

Cavity wax is a chemically active compound which consists of anti-corrosive solvents, rust inhibitors, and other mineral oils which work in tandem to build a protective coat over the area it is applied on. Because it has low surface tension, the coat looks and feels like wax in texture and is mainly used in exposed cavities in your undercarriage. It is always the cavities that can cause more damage like rust and grime clings on easier in these areas and gradually spreads over the undercarriage undermining its strength over a period. The wax coating not only supports the car base from the vagaries of terrain but also acts as an effective first layer against the occasional bumps and scratches due to low clearance.

What essentially happens when your car gets a scratch in the undercarriage is that after a spray of mud or saline water, a small quantity of these sticks to the indented part. This later easily turns to rust and spreads. Rust proof wax is a specialized corrosion inhibitor that has been developed especially to fight this problem. It effectively forms a waxy layer that acts as a corrosion repellent by simply not letting the corrosive saline particles from mud and grime cling on to the vehicle base. It is crucial that the coating should not be too dense since thick coating themselves can harbor air pockets of moisture, which can make the whole act counterproductive.

If you are looking for high quality cavity wax or rust proof wax, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Monday, 30 May 2016

How to Protect Your Automobile Base?



Experiencing “smoothness” in your drive is something that is dependent on a lot of factors. From the smoothest of terrains like perfected roads to rough and uneven off-road terrains, your vehicle is put to a lot of hardship during your journey. One of the most crucial parts of a car that is overlooked is the underside or base of your vehicle. The only part of your vehicle in direct contact with the ground is your car base, and it is this part of your vehicle that is the receptor of the hardships of the journey’s terrain.

Why it’s Necessary to Protect Your Car’s Base?

Besides, being the only part in direct contact, the car base is an entirely unprotected area of the car, where there's no fiber or metal sheets to protect the undercarriage of your vehicle. Right from the air tanks to even battery boxes and a heater and fan control module, the underside hosts some essential components and it's an integral part for your vehicle to operate smoothly. It's the reason why you need to ensure your vehicle base is protected, and the best way to go about it is by undercoating your car.

Car undercoating is the process of applying an undercoat to the vehicle base to protect it from rough terrains which can cause rust and corrosion to the undercarriage. The undercoat is the first line of defense for your vehicle’s undercarriage. The salt, grime, mud and dirt that your undercarriage might be subject to can cause rust and other forms of corrosion to the exposed parts of the components. It is always wise to apply an undercoat to protect your car's base.

Using an undercoat can help safeguard the undercarriage for years. It is not the kind of investment that you will have to repeat with your car maintenance once in six months. You can check the condition of the undercoat during maintenance to see if you need a new layer soon. Car undercoat is always recommended by car dealers, as it is a small investment compared to the amount you will have to spend in replacing your undercarriage in the case of damage.

If you are looking for high quality car undercoating, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Professional Rust Removal Methods



You may have worked day in and day out just to pay for your dream car. You could still be paying for its amortization up till now. It only means one thing – cars are your prized possession. Thus, it is expected of you to exert all effort to keep your car in good condition. Several elements in the environment can cause damage to your vehicle and can shorten its life. This is where rust inhibitor spray comes into play. It provides unbeatable protection for the car that you have always dreamed. Let us find out about how you can protect your car.

Ways to Protect Your Car

There are several suggestions on how you can protect your car from unwanted rust and corrosion. Here are few listed below:

1. Repainting – Most car owners opt to repaint their car to prevent the widespread of rust. It could be an effective way from the external perspective. What most car owners do not realize is the fact that merely painting the car does not remove the rust that has started to spread like wildfire. It can only cover the damage, but inside, your car is rotting without you knowing about it.

2. Sand Blasting – It is an old method of removing rust. It involves blasting the affected portion with pressurized fine sands. The abrasion caused by the sand to the body of the car removes the rust. Practically speaking, this method is effective in terms of removing the rust. The downside of this approach is the reduction in the thickness of the steel plate.

3. Electronic Module – This is a new technology used by car owners to combat rust and corrosion. This process involves applying a weak current to the body of the car. The electricity can prevent the rust from spreading through an electrochemical reaction. Although this is quite a new option pitched up in the market, it has drawn both negative and positive reviews from those who have tried it.

4. Oil or Wax Coating – This is the most popular and widely spread method used in protecting a vehicle from rust. Using rust proof spray, the body of the car is coated with a material that hardens and serves as a protective coating. It prevents the intrusion of acids, salts, and moisture that can instigate the formation of rust.

Among these options, car experts recommend the use of rust-proof coating due to apparent results of studies and testimonies from those who have tried it.

Application Frequency

Rust proof spray coating can last from one to two years depending on the brand and conditions in your area. The more exposed your vehicle is to elements like acid, scratches, salts, and moisture, the higher the tendency that the coating will be worn out faster. Ask your mechanic or your trusted car care center about the best brand and the frequency of application.

Are you looking for rust proof spray? Contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of rust proofing products for rust protection, sound damping, pine tar, wood protection, and thermal insulation. To know more, visit http://www.noxudolusa.com/products/ or Call 800-997-6536

Monday, 23 May 2016

All You Need to Know About Rust Proofing Vehicles



Vehicle rust proofing is a growing industry, although the face of rust proofing treatments has changed drastically over the last 20 years, according to experts on the Auto Guide website. As there are lots of elements that can cause corrosion to any vehicle, owners are willing to spend extra bucks just to keep their dream car corrosion and rust proof. There are multiple options as to how rust resistant proofing can be applied. It is up to the owners to choose an option best for the vehicle.

Auto Rust Proofing

Auto rust proofing has been practiced for quite some time now.  Despite being a traditional method of car vehicle protection, a lot of car owners cannot fully comprehend the ins and outs of this process. Here are some questions that you could have in mind and the answers that will resolve everything.

How often do I need to apply anti-rust spray?

Generally speaking, the frequency of anti-rust application depends on the brand of the rust proofing spray that you are using. Some brands can last for two years while others need to be recoated after 12 months. Always check the label of the product or visit some car protection forums online to see which brand can last the longest. 

Do the anti-rust coatings damage the vehicle?


Some anti-rust coatings contain ingredients that can be detrimental to rubber materials. It is important that contact to rubber parts be avoided during the application. As to the actual oil or wax applied, it is proven to be safe and cannot cause any defects to the vehicle.

Is drilling holes in my car necessary?

Depending on the method used in applying the coating, drilling holes on your car may be needed. Drilling of holes allows the dripping oil to spread up to the hard to reach areas of your vehicle ensuring thorough coating and protection. Most car owners become skeptical about this procedure but after reading from online forums, it is indeed necessary, and it is not an issue anymore.

Other than solvent-based coating are there other options for rust protection?

There are electric based modules that claim to prevent corrosion as effective as spray coatings. The mechanism involves allowing a weak electric current to run through the metals in the car base. It can prevent the development and spread of rust through an electro-chemical reaction. Although, most car owners claim that this is less effective method compared to solvent based coatings.

What type of rust proofing should I use?

Given several options to choose from, deciding a method that will work is a decision that you need to make. Try to consider the suggestions of your mechanic or your car care company. Take into account the cost that you are capable of spending. The most important thing is you need to ensure that your vehicle will be rust and corrosion free for the next few years.

Caring for your vehicle is a task that every car owner must undertake. Knowing how to protect your vehicle from rapid deterioration and which method is most applicable to you is a great advantage.

Are you looking for vehicle rust proofing? Contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of rust proofing products for rust protection, sound damping, pine tar, wood protection, and thermal insulation. To know more, visit http://www.noxudolusa.com/products/ or Call 800-997-6536

Tuesday, 17 May 2016

Methods of Anti-Rust Spray Application



Rust is the mortal enemy of many car owners. No matter how hard you protect your vehicles, rust just magically appears. Before you know it, your car looks even worse than those in the impounding areas. For car owners, preventing rust was a difficult task in the past. Today, there is a fast and efficient way to spray the rust away with advanced rustproofing techniques.

Car Corrosion

Cars are manufactured with excellent corrosion protection. This shield could be enough up to a certain point. Several factors that surround your vehicle can easily deplete its anti-corrosion material making it prone to rust and deterioration. These factors include:

•    Acids – Acidic environment attacks materials used in making the cases of vehicles

•    Salts – Salts can easily penetrate on cavities found on the cars body and can cause rotting of the vehicle

•    Car Washing Equipment – Tools and equipment used in making your car look good ironically can cause abrasion on its body removing corrosion resistant material

Car corrosion is an inevitable problem that all car owners will eventually face. What makes the difference between a corroded and a fully polished car is the promptness of the owner to address corrosion issues.

Rust Inhibitor Spray

Rust proofing spray is one of the best technologies used in preventing the widespread of rust on cars. There are several ways on how spray coating is applied to vehicles. These are:

1.    Tar-based Spray

This method involves the application of a tar-like substance on exposed areas of the car. This material eventually hardens and acts as a permanent protection against moisture and other elements. Due to the manner, it is applied; this method is also called undercoating.

2.    Dripless Oil Spray

This method of rustproofing uses dense oil applied to the entire body of the vehicle. This wax-like solution hardens just like the tar-based material and serves as the primary protection from substances that cause corrosion. To ensure that the entire vehicle is fully covered, small holes must be drilled on the car which is not appealing to most owners.

3.    Drip Oil Spray

In contrast to the dripless oil spray, this rust inhibitor application method uses a less viscous fluid that can easily drip and reach the other areas of the car. The application usually lasts for two days. It is the most recommended anti-rust spray method by experts, no wonder this service is a hot item on various car care centers.

Regardless of the method that you want to use, the most important thing is the protection of your vehicle. Choose the best method that suits the type of vehicle you have. It is also recommended to seek the advice of your personal mechanic or the services of a car repair and maintenance company. Do not feel bad about spending extra bucks as it could translate into more mileage with your most priced vehicle.

If you are looking for high quality rust proofing spray, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of rust proofing products for rust protection, sound damping, pine tar, wood protection, and thermal insulation. To know more, visit http://www.noxudolusa.com/products/ or Call 800-997-6536

Wednesday, 11 May 2016

The Benefits of Anti-rust Wax on Cars



Cars are one of the premium investments for most people. Due to the convenience and comfort brought by having your ride compared to taking public transportation, people spend tons of money to own one. Some people are even willing to avail financing options despite unreasonable interest just to bring home their dream car. With a stiff competition among vehicle manufacturers and dealers today, what could make a car edge over its competition? The answer is simple – rust proof wax.

If you are thinking twice about having your car waxed with rust proof material, this article will help you make up your mind.

What is Rust Proof Wax?


Rust proof wax, more commonly known as cavity wax, is a cutting edge technology applied to modern vehicles such as sports cars, sedans, SUVs, and others to provide an added layer of protection. Upon manufacturing, cars may contain lots of inner cavities in its body. These cavities could be the entry point of acidic liquids, salts, and other solutions that could deteriorate your vehicle from within. If not addressed immediately, water can penetrate into the body of the car and rust starts to develop.

Benefits of Anti-Rust Wax


You have spent a fortune just to buy your car. You might ask yourself, do I need anti-rust wax on my vehicle? The answer is a big yes! Here are a few reasons:

•    Aesthetics – Rust proof wax gives your car a smooth and lustrous polish making it look brand new

•    Protection
– By covering cavities on the car, wax offers additional layer of protection from rust that causes rapid deterioration of your car

•    Cost Effective – Though anti-rust application looks expensive at first glance, it is still cost effective to have this added to your vehicle than spending thousands of dollars for repairs and repainting

Who can Apply Rust Proof Coating?

Application of rust proof wax for cars is not too technical for you not to handle. Expert would recommend you the following tips:

1.    Always read the instructions on the packaging carefully

2.    Look for an open area to perform the coating activity

3.    Ensure here are no open flames in proximity to your work area

4.    Keep the material out of reach for children

5.    If the product was packaged in a spray canister, shake it well to homogenize the contents inside.

6.    Test spray on a piece of board before spraying to the car

7.    Apply evenly in one direction

If you are not comfortable applying the coating, you may tap the services of your personal mechanic, or you may bring your vehicle to the nearest car repair and maintenance center.

Cars are not cheap stuff. You have spent a significant fraction of your hard earned money to purchase one. Thus, it is just logical for you to exert all effort to maintain it rust free.

If you are looking for high quality rust proof wax, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of rust proofing products for rust protection, sound damping, pine tar, wood protection, and thermal insulation. To know more, visit http://www.noxudolusa.com/products/ or Call 800-997-6536

Tuesday, 29 March 2016

Pertinent Queries in Auto Rust-Proofing Answered

People living near salt water bodies especially notice that their vehicles are prone to oxidation very early, meaning rust can decrease the shelf-life of their ride. Whether you are a first-time vehicle owner or you simply happen to drive in the outback; your car will need corrosion protection. Read about the pertinent questions that plague most people about corrosion-proofing.

•    Why Opt for Protective Layers or Coating?

Moisture in the atmosphere can gradually come in contact with the under carriage of your car causing trouble, as it paves the way for corrosion. This reddish brown substance is nothing but the Achillies heel of metal, as it caused the sturdy iron to disintegrate over time. This ensures that your car is less durable than before and has a greatly reduced life.

Rather than looking for cures once corrosion gets in, it can be helpful to look for ways to avoid it altogether. This is what necessitates the use of a rust proof spray in every automobile.

•    What is your Best Option?

A rust spray seems to be the applicant of choice for many car owners. An advanced and eco-friendly coating is the best product in the market. The best part is that the spray is completely solvent free aiding you with corrosion protection and even sound damping.

There are quite a few sprays on the market, but you must choose a rust inhibitor spray that has been manufactured and engineered to offer protection to large as well as small vehicles for maximum protection.

Noxudol is a superior line of undercoatings and rustproofing products manufactured and engineered to provide excellent protection to all motor vehicles. To know more, visit http://www.noxudolusa.com/products/rust-protection-products/ or  to watch the process of undercoating car using Noxudol.


Wednesday, 23 March 2016

Tips to Protect the Underbody of your Sedan from Rusting














If you love your car and use it all the time to cross the shortest of distances, you will want to ensure that your ride has a long life. An important part of ensuring this is to make sure that every part of your SUV is protected from degradation via rusting. Lack of cavity wax can mean that your ride is unprotected in places where the manufacturers do not coat it. These tips about appropriate ways to protect your dean will help you ensure longevity for your car.

•    When you drive on rough roads or even highways, the occasional pebble bumping against your SUV’s undercarriage or a stretch of gravel can cause lasting damage. The undercarriage of your vehicle is quite vulnerable to such abrasions. Pebbles chip away at the paint and make way for rust. Using rust proof wax is one way to ensure that you do not have to invest in a new car or even expensive repairs in the near future.

•    The other part of your vehicle you need to take special care of are the cavities that miss the manufacturer’s rust coating. Even if no gravel scratches this region, it is still exposed to the elements and will deteriorate when dampness seeps in. Car owners use cavity wax for it can rid the parts of moisture and help maintain dryness.

Always opt for high quality cavity wax sprays that provide maximum penetration. These let you minimize risk of corrosion, while offering lucrative benefits such as sound muting.

Noxudol offers an extensive line of rust cleaning products including our remarkable solvent-free and water base products. To know more, visit http://www.noxudolusa.com/shop/ or watch this video below.



Wednesday, 16 March 2016

How under coating protects your vehicle?















Your car is a precious asset and you take a lot of care to ensure it is in top condition. You wash your car with caution ensuring grime of dirt is wiped out especially the underside as there is every chance of it gathering rust if not cleaned properly. With umpteen cables, tie rods, and brake parts, it is imperative the underside is in its best condition to ensure the best performance.

However, since washing the underside each time is quite time-consuming as well as not practical every time, the best solution is to give your car an undercoat that will solve the problem once and for all. There are significant benefits you stand to gain by giving your vehicle the much-needed undercoat.

1.    Undercoating ensures even the smallest hole under your car is sealed up, and this helps to make your drive quieter as you ride along the road.

2.    It prevents your car from absorbing all kind of dirt your car may collect while driving, thus helping it to remain comparatively clean in the long run.

3.    It provides an extra coating and protective layer against rust formation.

Car undercoating can be done either by employing professional help or even by purchasing a DIY kit. While hiring professional help may be quite an expensive affair; it is worth the money spent as the experts do a more thorough job.

On the other hand, do it yourself kits work out to be five times cheaper if you are willing to try it out and have enough time. These kits come with detailed step by step guidelines as to how it should be carried out. Remember to adorn a set of old clothes and also to wear goggles to protect your eyes while you are at the job. Make sure you get a professional cleaning of your engine done before you begin this job.

You can also consider an extra undercoating done when you purchase the car. Although car companies charge you for the job mentioned above, you can get an excellent job done.

In case, if you haven’t got an undercoat done for your car, you need to start seriously thinking about doing it at the earliest as prevention is always better than cure.

Noxudol is an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. To know more, visit http://www.noxudolusa.com/products/rust-protection-products/ or  to watch how rust inhibitor spray works.

Wednesday, 9 March 2016

Do not let Rust Eat up your Car














Rust is ubiquitous. It is the brown flaky substance that can accumulate on the surface of iron and steel materials, thereby inhibiting their performance and look. Vehicles are more prone to rusting as they are outside most of the time. Rust can make the spangling car lose its shine and ruin its look in the process. For many people, a car is a big purchase and wish to have it look new for a long time to come. These tips can be helpful to protect your vehicle from rust and help to retain its shine as it was on the first day.

Rusting is a fast process, but it can spread even more quickly if it gets an optimum supply of air and moisture. Air and humidity in the surroundings of the vehicle create the perfect environment for it to spread like an infection. 

Check for any water leak over and around the car for protection, this can be an open tap around a car or a leakage in a pipe. Do not park where water is present. It will help a lot and defer the process. Vehicles are prone to rusting as they move on under various conditions. Dust accumulation along their bodies traps the moisture and initiates the rusting process. Frequent cleaning with water could also be the cause. Avoid regular wash and never use hard water for cleaning purpose. Hard water contains various salts like chlorides of sodium and magnesium which are the principal agents of corrosion. Dry the vehicle for an hour or two in the sun after every wash and polish it with wax or a rust proofing spray.

Coat the vehicle to isolate it from the outside environment. Teflon coating is the cheapest alternative for coating purpose. You need to coat with Teflon once every year to prevent rust and scratches. If the structure is large, use rustproofing to cover it once every four months. Interior cleaning is also necessary, clean the car immediately after any spills to prevent rusting from inside.

Along with air and moisture, road salt is the chief cause of rusting. Deposits of salt and dirt are common especially under the vehicle which results in rust. Road salt increases the corrosion at excessive speed. Oil the body of the car during spring not in fall as the moisture level is at the peak in spring. Mineral based oil is an expert in rustproofing. Apply it to the door joints and screws which are the source of rust. Use it with coating gel at areas like wheel ridges and rocker panels. Use rust proofing spray as well for inaccessible areas.

Follow these steps and keep your car new for years to come.

Noxudol is a superior line of undercoatings and rustproofing products manufactured and engineered to provide excellent protection to all motor vehicles. To know more, visit http://www.noxudolusa.com/products/rust-protection-products/ or watch this video.