Tuesday, 28 June 2016

Popular Misconceptions about Rust Proofing In Cars



Everybody would like to have their car maintained properly with new look and good resale value. You are also no exception. Unfortunately, cars are made up of metals and steel which make them prone to rust. It is something that is inevitable because rust gets developed based on many factors which are beyond our control. There are many misconceptions surrounding rust and rust proofing that may give you a wrong idea about them. These misconceptions are given below,

•    Rust Proofing In Cars Are Not Done After Rust Appears

If your car was affected by rust, Rust proofing can be done to avoid the rust getting spread to other parts. This can slow down the corrosive process and save those parts you still have left.

•    Rust Proofing Should Be Avoided During Winter

People used to avoid rust proofing jobs at winter because of the moist and salty environment. Salt when gets combined with moisture serves as a catalyst to the corrosion process which can severely affect your vehicle if it is unprotected. As long you clean the car thoroughly and get rid of the salt, rust proofing application can still be done. It is also recommended better to apply it before the winter starts.

•    Rust Proofing Should Be Done Annually

This is a wrong assumption. Rust proofing can withstand for years. In fact, best rust proofing jobs can last up to 10 years depending on the condition of the vehicle.

•    Rust Cannot Be Repaired

If caught on earlier stages, the progress of rust can still be halted. It still depends on where and how far the rust is spread. If left unchecked, rust becomes irreparable and the damage is irreversible.

•    New Cars Does Not Require Rust Proofing

False! New cars are usually made of galvanized steel and there are widespread rumors that it provides protection against rust. Galvanized steel consists of prefabricated sheets of steel coated with zinc to prevent rusting. But to meet the specifications of the car design, the steel undergoes the process of welding, drilling and fitting. These processes make the steel to become stretched and worn which makes them more vulnerable.

These misconceptions keep your vehicle in danger and can lead you to lose a large amount of money in future. Keep yourself well informed about Rust proofing and protect your car from rust.

Monday, 20 June 2016

The Perks of Using Spray to Rust Proof Your Vehicle



Rustproofing your vehicle, be it old or new, is a necessary act because of many factors. Right from changes in climatic conditions and humidity to the highly corrosive chemicals used in ice and snow cleaning inroads, some harmful agents can put your vehicle body to test. Rust can cling on and spread throughout your vehicle body finally leading it to crumble in structure.

While there are quite a lot of techniques to rustproof your car, a spray can be the most advantageous of these due to many aspects. Here are a few reasons why it is better to rust proof your undercarriage with spray rather than other means:

1. Better Approach: Rust just needs a square centimeter of your undercarriage to hold on to and later on starts spreading. When you use other methods, the chances are that you won’t cover every nook and corner of the exposed parts in your undercarriage. A rust proof spray, on the other hand, can be used to cover these tough spots since you get stream concentrating tubes to attach to the nozzle that lets you cover these tough spots.

2. Easier to Apply: It's obvious that spray painting is easier than conventional brush methods, and the same goes for undercarriages. You can quickly spray on the rust proof coat rather than paint it with a brush. You can also adjust the area you want to cover with a tweak in the nozzle, whereas you will have to buy some brushes to cover little spots to bigger areas.

3. You can Choose the Density of the Coat: When it comes to choosing the density of the coat you are applying, you have very little control while using conventional means. By using a spray, you have definite control over the density. In the case of small parts, applying excessive coat can lead to the formation of air pockets which can harbor moisture and lead to corrosion. While using a spray, all you need to do is use it on rust prone places to ensure that the part is completely covered, but not over covered with the rust inhibitor spray.

If you are looking for high quality rust inhibitor spray, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Wednesday, 15 June 2016

Five Reasons Why You Should Rust Proof Your Vehicle



Whether you own a brand new car or your car is a few years old; there are aspects of any terrain that can truly test the strength of integrity of your vehicle. All cars are made of steel or its compound, and steel is an alloy of iron. With climatic fluctuation, temperature rises and drops, humidity and saline solutions being a part of the atmosphere, your vehicle can be the host of quite a set of unfavorable chemical reactions which can lead to corrosion of body parts due to rust. Rust can be a huge issue and here are five reasons why you should take rustproofing seriously:

1.    Your Undercarriage is Most Unprotected: Your undercarriage is the one part of your vehicle that is most overlooked and unprotected. Rust in your undercarriage can spread like a rash, and it can cause your vehicle to crumble from its inside.

2.    Uneven Terrain and Ground Contact: Uneven terrain, especially off road terrain which can contain all form of gravel and dirt can be a huge threat to your vehicle. Sometimes ground clearance can be challenging, and your vehicle might get a few bumps and scratches on the underside. What this does is scratch off the factory coat of wax and opens an area to harbor rust in your undercarriage.

3.    Ice Control Chemicals: If you live in cold places where snow and ice falls are frequent, then chances are your undercarriage is being worked on by some strong chemicals. Ice and snow control agents are deposited on the roads, to make them dissolve and melt faster. When you cruise along these roads, your undercarriage is subject to a spray of these chemicals in the form of melted ice.

4.    Temperature Fluctuations and Humidity: Humidity and moisture can be a huge catalyst for rust. If you live in tropical areas with quite a bit of rainfall and humidity, then it would be wise to use a rust proofing spray as soon as you buy your car since it can start rusting in no time.

5.    Spot Welding: Cars these days use “Galvannealed” steel to prevent rust. But when you do spot welding as part of your maintenance, the zinc coating around the area is melted off, and this can lead to an unprotected area where rust can build.

If you are looking for high quality rust proofing products, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536

Wednesday, 8 June 2016

How to Rust Proof Your Car Base?



Your vehicle undercarriage is the most exposed and most overlooked part of your vehicle. Right from dirt, mud and grime to occasional bumps and scratches due to low clearance, your vehicle’s integral parts like air pumps, fuse boxes and filters are going to be in big trouble. One of the main issues is that your undercarriage is subject to rust.  It can be a slow killer, almost like cancer it gradually spreads to virtually all crucial parts in your car base till you have to replace everything. The cost of replacing the parts of your undercarriage can be pretty high, and the safest thing to do is to prevent rust and other corrosive agents from getting hosted in your car base.

Cavity wax is a chemically active compound which consists of anti-corrosive solvents, rust inhibitors, and other mineral oils which work in tandem to build a protective coat over the area it is applied on. Because it has low surface tension, the coat looks and feels like wax in texture and is mainly used in exposed cavities in your undercarriage. It is always the cavities that can cause more damage like rust and grime clings on easier in these areas and gradually spreads over the undercarriage undermining its strength over a period. The wax coating not only supports the car base from the vagaries of terrain but also acts as an effective first layer against the occasional bumps and scratches due to low clearance.

What essentially happens when your car gets a scratch in the undercarriage is that after a spray of mud or saline water, a small quantity of these sticks to the indented part. This later easily turns to rust and spreads. Rust proof wax is a specialized corrosion inhibitor that has been developed especially to fight this problem. It effectively forms a waxy layer that acts as a corrosion repellent by simply not letting the corrosive saline particles from mud and grime cling on to the vehicle base. It is crucial that the coating should not be too dense since thick coating themselves can harbor air pockets of moisture, which can make the whole act counterproductive.

If you are looking for high quality cavity wax or rust proof wax, contact Noxudol, an advanced line of Eco-friendly solvent free coatings from rust protection to sound damping. Noxudol offers a wide range of products including rust prevention products, sound dampening products, thermal insulation products, pine tar and other rust protection products. To know more, visit http://www.noxudolusa.com/ or Call 800-997-6536